Skip to content

Gulfstream G650 (twin 30mm edf)

Created: October 12, 2026

Last updated: October 12, 2026

1 download
440,00 Kč
Du kjøper digitale filer for 3D-utskrift, ikke en fysisk modell.
Rett etter betaling mottar du nedlastingslenken i ordrebekreftelsen, på ordrestatussiden og på e-post.

This replica of the Gulfstream G650 is designed for quick and easy construction, printed using lightweight PLA (LW-PLA). Designed to suit the QX 30mm EDF 7000kv or XFly Galaxy X4 40mm EDF , utilizing 4 channel controls; Aileron, Elevator, Rudder and Throttle along with the powerful combination of twin EDFs, this model holds a fantastic presence in the air of its full scale counterpart and is fully capable of light aerobatics maneuvers such as; Loops and Barrel-rolls. It can also be flown like a trainer, using only Rudder and Elevator thanks to its strong roll-yaw coupling. Links to components used can be found on the last page of the user guide.


Official flight video:

https://www.youtube.com/watch?v=5uFTQ1SEDBQ


GENERAL SPECIFICATIONS:

WINGSPAN: 789mm

PRINT WEIGHT: 300g

FLYING WEIGHT: 550g


ELECTRICS:

MOTOR: QX 30mm edf 7000kv or XFly Galaxy X4 40mm EDF

ESC: 15amp

SERVOS: 3.7g MICRO

BATTERY: 1400mah 3s (120g)


INCLUDED:

Factory files for Simplify 3d

G-code files

STL files for all components

Detailed assembly manual and user guide

Print settings guide


REQUIRED TOOLS:

KNIFE

LIGHTER

SANDPAPER (MEDIUM GRIT 320 recommended)

PLIERS

CA GLUE (super glue)

SCREW DRIVERS

FILE OR RASP

SOLDERING IRON (led version)

DRILL / BITS (1mm, 2.5mm, 3mm)


REQUIRED COMPONENTS:

X2 QX 30mm EDF 7000kv or XFly Galaxy X4 40mm EDF

X2 15 AMP ESC

X1 1400mah 3s

X4 3.7g Micro servo

X2 10x10x2mm MAGNET (ROUND)

X2 1mm x 500mm Carbon rod (round)

1mm piano wire (460mm min)

VELCRO

M2 x 6mm screws

3mm BAMBOO FOOD SKEWERS

MINIMUM BUILD VOLUME: 200mm x 200mm x 200mm


MINIMUM BUILD VOLUME: 200mm x 200mm x 200mm

Print settings document, templates for cura, bambu studio and prusa slicer included

Back to top