Heron 1150mm
Published: October 14, 2026
downloadsDíreach tar éis na híocaíochta, gheobhaidh tú do nasc íoslódála i ndearbhú an ordaithe, ar leathanach stádais an ordaithe agus trí ríomhphost.
An bhfuil ceist, tuairim nó gearán agat faoin táirge? Déan teagmháil go díreach leis an gcruthaitheoir tríd an gcnaipe “Contact creator” ag barr an leathanaigh seo.
Twin motors, jet looks, and a thrust-to-weight ratio of about 4:1.
This 3D printed jet-style sport plane is built to be fun in the air. With a 1150mm wingspan and a flying weight of around 1100–1200 g, it's gentle when you want it to be: the low stall speed keeps slow passes and landings relaxed and easy to control. When you're ready for more, the twin wingtip motors give you the power to open it up and fly really fast.
The result is an excellent flying model with a wide speed range, wrapped in a sporty jet-style plane that looks great on the ground and even better in the air. PLA LW parts printed with a 0.8mm nozzle are very strong, lightweight, and are produced extremely fast. 0.8mm nozzle is required for PLA LW parts!
Key features:
- Wingspan: 1150mm
- Flying weight: approx. 1100–1200 g
- Two motors mounted at the wingtips
- Thrust-to-weight ratio: approx. 4:1
- Low stall speed, high top speed
- All-moving stabilator
You’ll need:
- Motor - 2x iFlight XING2 2207 2050Kv or similar
- ESC - 2x OddityRC Vortex F65A 2-6S AM32 or similar
- Servo - 3x BMS-126WV+ or similar
- Battery - 1050mAh 6S or similar
- Tx - Frsky X20S or any other
- Rx - depends on your system
PLA LW 0.8mm nozzle print settings:
- nozzle temperature ~ 250°C
- flow ~ 40-50%
- layer height - 0.56mm
- X-Y contour compensation - 0.56mm
You’ll get:
- BambuStudio slicer ready 3MF files
- STL files
- 3D user quide link ↓↓
