Siirry sisältöön
  1. Explore 3D-printable files for RC models.
  2. Publish and sell 3D-printable files of your RC models.
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm
RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm

SigiRC

RC Glider Salto H101 3 versions: glider, with motor/prop, with retractrable EDF 50mm

Created: November 04, 2026

Last updated: November 04, 2026
Ostat digitaalisia tiedostoja 3D-tulostukseen, et fyysistä mallia.
Heti maksun jälkeen saat latauslinkin tilausvahvistukseesi, tilauksen tilasivulle ja sähköpostitse.
Onko sinulla tuotteesta kysyttävää, palautetta tai valituksia? Ota yhteyttä suoraan tekijään sivun yläosassa olevalla ”Contact creator” -painikkeella.

RC Glider Salto H101 1:6, wingspan 2552 mm, TOW 2100-2300 g, homage to the vintage WIK Salto out of the 70s, new 4flap-wing design with a modern JX airfoil (Vtail HT33)


fairplay: please share these files only within your family


all files included for 3 versions:

glider solo, glider with motor/prop, glider with retractable edf

CG/ transportation stand


stronger v2 wing with double spar


update 01 2026-01-02: fitting edf bracket/nacelle to new FMS 50 design


update 02 2026-02-05: print part 34/35 F7 L/R for more stiffness with full walls (walls are infill, printcode: PETG 10 2 2 0)


update 03 2026-03-02: reinforcement spar center , 2 printed parts (PETG 50 2 2 0) additional: 6x threaded insert M2.5, 6x M2.5 x 14


update 04 2026-08-25: reinforcement spar center, modified parts 14a 14b, glue main spar 8mm R L into/together and reinforce center with CFK/epoxy


rc equipment:

6x HV servo 2xFlap/2xAil/2xVtail Ele Rud

1x HV servo retractable EDF (optional)

1x ESC minimal 50A, HV BEC

8CH receiver

4s Accu 3000mAh

no gyro


optional:

50mm EDF (FMS) or

outrunner motor (Dualsky) with folding Prop 10x6


a list of all additional parts and settings as well as building instructions are included in the download


under construction:

hotliner version v3 with CFK reinforced wing, mainspar, tail


maiden and first flights

https://youtu.be/D2CZtmN02xU?si=s0jTz2DLepvhXvs0


a nice winterflight

https://youtu.be/Huyl64ppfC0


cool winter fotoshooting: https://instagram.com/@zazsigi.rcvtol


"how to build and more" video under construction


don't hesitate to contact me via comment section of this design if you have any questions or problems


"a handsome glider for everyday", happy printing


3D-Druckeinstellungen

minimal print volume 220x220x250, for best results use a printer with core x/y, protoype was printed on kartesic (bed-mover) printer, due to the thin airfoil, the small flap, ail and elevator parts might have unprecise areas and need some post-processing


all parts printed in LW PLA (flow75) oder PETG HS,

each stl has a specific number and material/print recommendation


example: 01 canopy part1 v4 LW 1224 =

part No. 01, Version 4, printed with LW PLA (best results with colorFabb LW filament) and 1wall, 2top, 2bottom, 4%gyroid infill

top/bottom calculation with layer height 0.25, adjust when printed thinner


all functional PETG HS parts normaly with flow 100, 222 20, or defined


!LW tolerances for vertical printing!


only R right stl's for wing, flap, ail and Vtail parts, for L mirror in your slicer