1/10 RC Soviet BRDM-2 armored ambhipious vehicle
Created: November 05, 2026
Last updated: November 08, 2026
Heti maksun jälkeen saat latauslinkin tilausvahvistukseesi, tilauksen tilasivulle ja sähköpostitse.
Onko sinulla tuotteesta kysyttävää, palautetta tai valituksia? Ota yhteyttä suoraan tekijään sivun yläosassa olevalla ”Contact creator” -painikkeella.
New version of fully 3D printable soviet BRDM-2 armored vehicle in scale 1/10. Updated 8.11.2026.
4-Wheel drive (AWD).
Fully ambhipious.
Please visit my official website to find assembly guides, tips and electronics setup guide
Video:
Swimming:
Two optional modifications:
1. Reconnaissance version with 14,5mm KPVT heavy machine gun
2. 9P148 Konkurs ATGM launcher (Anti-Tank-Guided-Missile)
Link to assembly guide:
https://drive.google.com/drive/folders/1hTiCMBpkU9LwW3EsVwAm4ub-r-CzAKaK?usp=sharing
The BRDM-2 (Boyevaya Razvedyvatelnaya Dozornaya Mashina, Боевая Разведывательная Дозорная Машина, literally "Combat Reconnaissance/Patrol Vehicle") is an amphibious armoured scout car designed and developed in the Soviet Union. It was also known under the designations BTR-40PB, BTR-40P-2 and GAZ 41-08. This vehicle, like many other Soviet designs, has been exported extensively and is in use in at least 38 countries. It was intended to replace the older BRDM-1, and has improved amphibious capabilities and better armament compared to its predecessor.
Lenght: 575mm
Width: 234mm
Height:
Recon - 244mm
ATGM – 300 mm
Weight: approx 4 kg
Detailed, full of functions and easy to build (print).
All wheel drive.
Combined leaf spring and coil spring suspension.
Servo driven turret traverse.
Retractable auxiliary wheels.
Functional propeller, rudder and sealed hull.
Functional headlights, taillights and turn signals.
Printed tires.
New upgraded hybrid (belt/gear) transmission.
Easy access to the transmission for maintenance.
The vehicle can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.
The model contains everything what you need to print and build the tank:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)
Shopping list:
Screw M2x8 – 1x
Screw M3x6 – 3x
Screw M3x10 – 135x
Screw M3x15 – 4x
Screw M3x18 – 14
Screw M3x20 – 2x
Screw M3x25 – 4x
Screw M3x40 – 4x
Screw M3x60 – 2x
Nut M3 – 22x
Socket set screw M3x6 – 2x
Motor 540 (35T or higher) – 1x
Rubber band – 5x (or 4x soft coil springs and 1x rubber band)
Bearing 10x15x4 – 26x
Bearing 15x21x4 – 4x
Steel wire 1mm – approx 5cm
Steel wire 2mm (e.g welding rod for autogenous welding) approx 75cm
Standard servo 360° (for turret traverse) - 1x
Standard servo 180° (for auxiliary wheels control) – 2x
Standard servo 180° (for steering) - 1x
Standard servo 180° (for rudder) – 1x
Glue
Magnet 10x2mm – 8x
Rope/string – 1mm thickness
Lights:
LED 5mm warm white – 4x
LED 3mm orange – 4x
LED 3mm red – 2x
Coil springs – 4x:
Outer diameter max: 9mm
Inner diameter min: 6mm
Lenght with no load: max 40mm
Spring stiffness: approx 1 N/mm
Belt 60 XL 6,35mm – 3x
Whole model is designed for FDM printers only.
If you have any questions please do not hesitate to send me an email.
I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.