Siirry sisältöön

1/10 RC german Panzerjäger Tiger (P) Ferdinand heavy tank destroyer

Created: November 05, 2026

Last updated: November 05, 2026

843,00 Kč
Ostat digitaalisia tiedostoja 3D-tulostukseen, et fyysistä mallia.
Heti maksun jälkeen saat latauslinkin tilausvahvistukseesi, tilauksen tilasivulle ja sähköpostitse.
Onko sinulla tuotteesta kysyttävää, palautetta tai valituksia? Ota yhteyttä suoraan tekijään sivun yläosassa olevalla ”Contact creator” -painikkeella.

Fully 3D printable German Panzerjäger Tiger (P) Ferdinand heavy tank destroyer in scale 1/10.

Please visit my official website to find assembly guides, tips and electronics setup guide

https://redneck3dmodel.com/

Video:

https://youtu.be/qleKcWqypiY

Link to assembly guide:

https://drive.google.com/drive/folders/1I-jd-Sun8hmou-D7mqqyn8412_2UgBNF?usp=sharing

The Panzerjäger Tiger (P), originally known as the Ferdinand, was a German heavy tank destroyer of the Second World War. It was based on the unsuccessful Porsche Tiger prototype chassis, which had lost the competition to the Henschel-designed Tiger I. Rather than abandoning the completed Porsche chassis, the German Army decided to convert them into heavily armed tank destroyers.

Designed around the powerful 8.8 cm Pak 43/2 L/71 anti-tank gun, the Ferdinand was one of the most heavily armed and armoured German combat vehicles of its time. The vehicle featured a massive casemate at the rear of the hull, protected by up to 200 mm of frontal armour, while the long 88 mm gun provided exceptional penetration at long ranges. The Porsche chassis used an unusual petrol-electric drive system, with two petrol engines driving electric generators that powered electric motors connected to the tracks.

A total of 91 Ferdinands were built in 1943 using the remaining Porsche Tiger chassis. They first saw combat during the Battle of Kursk, where their powerful gun and heavy frontal armour made them formidable tank destroyers. However, the vehicles suffered from mechanical problems, limited mobility and the lack of a defensive machine gun, making them vulnerable to close-range infantry attacks.

Lenght: 811mm

Width: 340mm

Height: 299mm

Weight: approx 8kg

Detailed, full of functions and easy to build (print).

Functional suspension.

Functional gun traverse.

Functional gun elevation.

Functional barrel recoil.

Printed tracks.

Hybrid transmissions (belt drive+printed gears).

Easy access to the transmissions for maintenance.

The vehicle can be equipped with various electronics and functions.

It is up to you how much you would like to use all the options.

The model contains everything what you need to print and build the vehicle:

STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)

Shopping list:

Screw M2x6 – 70x

Screw M2x8 – 4x

Screw M3x6 – 4x

Screw M3x10 – 156x

Screw M3x25 – 4x

Socket set screw M3x6

M3 nut – 4x

Motor 540 (50T or higher) – 2x

Belt 60XL 6,35mm – 2x

Bearing 10x15x4 – 34x

Bearing 15x21x4 – 60x

Steel wire 1mm (e.g welding rod for autogenous welding) approx 10cm

Steel wire 2mm (e.g welding rod for autogenous welding) approx 13m

Servo SG90 or MG90 180° or 360° (for gun traverse) - 1x

Servo SG90 or MG90 180° or 360° (for gun elevation) – 1x

Servo SG90 or MG90 180° (for gun recoil) - 1x

Glue

Whole model is designed for FDM printers only.

If you have any questions please do not hesitate to send me an email.

I have spent a lot of time developing this model.

Please, dont share this STLs, it will affect my next releases.

Thank you very much.

Back to top