PA-60 Piper Aerostar 750mm

This replica of the Piper Aerostar PA-60 is designed for quick and easy construction, printed using lightweight PLA (LW-PLA). Designed to suit the 2305 2300kv brushless outrunner (drone motor). Utilizing 5 channel controls; Aileron, Elevator, Rudder, Flaps and Throttle along with the powerful combination of twin motors, this model holds a fantastic presence in the air of its full scale counterpart and is fully capable of light aerobatics maneuvers such as; Loops and Barrel-rolls. whilst normally reserved for larger models, the addition of flaps means this modoel can be flown in to land very slowly and makes landing a breeze! Links to components used can be found on the last page of the user guide.

Official flight video:

coming soon

Trailer video here:

https://www.youtube.com/watch?v=AtKtV49FyyU

GENERAL SPECIFICATIONS:

WINGSPAN: 750mm

PRINT WEIGHT: 325g

FLYING WEIGHT: 660g

ELECTRICS:

MOTOR: 2305 2300kv

ESC: 20amp

SERVOS: 3.7g MICRO

BATTERY: 1400mah 3s (120g)

INCLUDED:

Factory files for Simplify 3d

G-code files

STL files for all components

Detailed assembly manual and user guide

Print settings guide

REQUIRED TOOLS:

KNIFE

LIGHTER

SANDPAPER (MEDIUM GRIT 320 recommended)

PLIERS

CA GLUE (super glue)

SCREW DRIVERS

FILE OR RASP

SOLDERING IRON (led version)

DRILL / BITS (1mm, 2.5mm, 3mm)

REQUIRED COMPONENTS:

X2 2305 2300kv

X2 20 AMP ESC

X1 1400mah 3s

X6 3.7g Micro servo

X2 10x10x2mm MAGNET (ROUND)

X2 1mm x 500mm Carbon rod (round)

X1 3mm x 500mm Carbon rod (round)

x3 1mm piano wire (350mm min)

VELCRO

M1.6 x 6mm screws (self tapping)

M2 x 6mm screws (self tapping)

3mm BAMBOO FOOD SKEWERS

MINIMUM BUILD VOLUME: 200mm x 200mm x 200mm