1/10 RC german Panzerjäger Tiger (P) Ferdinand heavy tank destroyer
Created: November 05, 2026
Last updated: November 05, 2026
Inmediatamente después del pago recibirás tu enlace de descarga en la confirmación del pedido, en la página de estado del pedido y por correo electrónico.
¿Tienes preguntas, comentarios o reclamaciones sobre el producto? Contacta directamente con el creador mediante el botón «Contact creator» en la parte superior de esta página.
Fully 3D printable German Panzerjäger Tiger (P) Ferdinand heavy tank destroyer in scale 1/10.
Please visit my official website to find assembly guides, tips and electronics setup guide
Video:
Link to assembly guide:
https://drive.google.com/drive/folders/1I-jd-Sun8hmou-D7mqqyn8412_2UgBNF?usp=sharing
The Panzerjäger Tiger (P), originally known as the Ferdinand, was a German heavy tank destroyer of the Second World War. It was based on the unsuccessful Porsche Tiger prototype chassis, which had lost the competition to the Henschel-designed Tiger I. Rather than abandoning the completed Porsche chassis, the German Army decided to convert them into heavily armed tank destroyers.
Designed around the powerful 8.8 cm Pak 43/2 L/71 anti-tank gun, the Ferdinand was one of the most heavily armed and armoured German combat vehicles of its time. The vehicle featured a massive casemate at the rear of the hull, protected by up to 200 mm of frontal armour, while the long 88 mm gun provided exceptional penetration at long ranges. The Porsche chassis used an unusual petrol-electric drive system, with two petrol engines driving electric generators that powered electric motors connected to the tracks.
A total of 91 Ferdinands were built in 1943 using the remaining Porsche Tiger chassis. They first saw combat during the Battle of Kursk, where their powerful gun and heavy frontal armour made them formidable tank destroyers. However, the vehicles suffered from mechanical problems, limited mobility and the lack of a defensive machine gun, making them vulnerable to close-range infantry attacks.
Lenght: 811mm
Width: 340mm
Height: 299mm
Weight: approx 8kg
Detailed, full of functions and easy to build (print).
Functional suspension.
Functional gun traverse.
Functional gun elevation.
Functional barrel recoil.
Printed tracks.
Hybrid transmissions (belt drive+printed gears).
Easy access to the transmissions for maintenance.
The vehicle can be equipped with various electronics and functions.
It is up to you how much you would like to use all the options.
The model contains everything what you need to print and build the vehicle:
STL files for every printed part, assembly guide and shopping list (screws, motors, servos....)
Shopping list:
Screw M2x6 – 70x
Screw M2x8 – 4x
Screw M3x6 – 4x
Screw M3x10 – 156x
Screw M3x25 – 4x
Socket set screw M3x6
M3 nut – 4x
Motor 540 (50T or higher) – 2x
Belt 60XL 6,35mm – 2x
Bearing 10x15x4 – 34x
Bearing 15x21x4 – 60x
Steel wire 1mm (e.g welding rod for autogenous welding) approx 10cm
Steel wire 2mm (e.g welding rod for autogenous welding) approx 13m
Servo SG90 or MG90 180° or 360° (for gun traverse) - 1x
Servo SG90 or MG90 180° or 360° (for gun elevation) – 1x
Servo SG90 or MG90 180° (for gun recoil) - 1x
Glue
Whole model is designed for FDM printers only.
If you have any questions please do not hesitate to send me an email.
I have spent a lot of time developing this model.
Please, dont share this STLs, it will affect my next releases.
Thank you very much.