Xenon 90mm EDF
Published: October 12, 2026
1 downloadTuj post la pago vi ricevos vian elŝutan ligilon en via mendokonfirmo, en via mendostata paĝo kaj retpoŝte.
Ĉu vi havas demandojn, rimarkojn aŭ plendojn pri la produkto? Bonvolu kontakti la kreinton rekte per la butono „Contact creator“ supre de ĉi tiu paĝo.
A fun, lightweight 90mm EDF sport jet designed for precision aerobatics, completely 3D printed from LW-PLA and PETG.
The Xenon features multiple fast and secure snap connections on the wings and canopy. These allow for a quick and uncomplicated setup at the model airfield.
Minimum Printer size 250X250X250mm
Wingspan: 1380 mm
Length: 1670 mm
Flying Weight: ~3.6 kg
Power Setup: 90 mm EDF, 90A ESC, 5300 mAh 6S LiPo
I used ColorFabb LW-PLA with 65% flow. The infill used is specified in the name of each respective part.
We recommend a Freewing Landing gear with 50 mm tires on the main gear.
Center of Gravity (CG): 130 mm aft of the leading edge, measured at the wing break.
Materials needed:
2 m × 10 mm CFK tube, cut into 2 × 610 mm and 2 × 390 mm
4 m × 2 mm CFK rod for linkages and hinges
1 m × 5 mm CFK tube, cut into 2 × 200 mm for elevator reinforcement
2 × spools of ColorFabb LW-PLA
1 × spool of PETG
Flying video:
https://www.youtube.com/watch?v=NVYEeseDvhA
